How to improve the marking speed of fiber laser marking machine?

16 Feb 2019

By Daisy

Laser marking machine can be used to include plastic and rubber, metal, silicon wafer and other materials. Laser marking is not only a major factor in recent years Laser marking, as a new processing method, has the advantages of accuracy, rapidity, simplicity of operation, high degree of automation, etc., in sheet metal processing, advertising production, etc. Lighting hardware, auto parts and other industries have been widely used. The purpose of the optical fiber laser marking machine is to bring higher production efficiency and create higher value to the enterprise, so how to improve the marking speed of the fiber laser marking machine? Next, let's take a look at it:

If the marking density is the same size, the same light spot, the same depth, the higher the marking density is, The slower the marking speed is, the more the density increases the marking area.
. The main factors affecting the optical fiber laser marking machine are internal factors and workpiece processing factors. The main internal factors are laser frequency, laser spot mode and beam divergence angle, laser power, reasonable auxiliary gas and matter in optical shaping process. Internal factors mainly in the early model selection attention, should follow the advice of laser engineers to purchase. Another factor needs to be noticed when the customer processes, mainly marking density, marking format, marking depth and laser spot size.
The smaller the laser spot size, the smaller the marking volume, so the larger the spot, the faster the marking speed. Moreover, the smaller the laser spot size, the finer the line width is, the more clear and small characters can be marked.
According to the demand, if the depth of marking is deepened, the parameters of the optical fiber laser marking machine should be adjusted, and the power and current of the optical fiber laser marking machine should be increased, so the marking speed will be affected in these processes.
The larger the size of the marking, the larger the deflection angle of the laser marking mirror and the larger the trajectory of the pattern, therefore, the larger the size of the mark, the greater the deflection angle of the laser marking mirror and the movement track of the pattern. In the case of recording speed, the marking speed of large format is longer than that of small format. These are the techniques to improve the marking speed of the optical fiber laser marking machine. According to the requirements, the parameters of the optical fiber laser marking machine should be adjusted, and the filling density, marking speed, laser frequency, laser power and other factors of the optical fiber laser marking machine should be adjusted.

Therefore, the above parameters will affect the final effect of the marker during these processes. Hope that customers can follow these laws, reasonable speed of marking, create higher economic benefits.